Atlas Copco GA 75+ - Programming the Week Cycle

(1) Monday
(2) Start
(3) Save
(4) Modify
• To adjust the time, use the Scroll keys on the controller and press the Enter key to confirm.
(1) Monday
(2) Start
(3) Save
(4) Modify
• A pop-up window opens. Use the ↑ or ↓ key of Scroll keys to modify the values of the hours. Use the ←
or → Scroll keys to go to the minutes.
(1) Monday
(2) Time
(3) Save
(4) Modify
• Press the Escape key on the controller. The action button Modify is selected. Use the Scroll keys to select
the action Save.
Instruction book
102 2920 7109 60