1 Condensate outlet
2 Condensate test outlet
1 Condensate outlet connection of the OSCi
2 Condensate sample valve
5.3 Putting into operation (commissioning)
1. Verify that the OSCi drain valves (4) are closed.
2. Unscrew the clamping ring (1) of the cover of the first vessel of the OSCi and take off the cover (2).
3. Take out the CDROM and the box (3) with the test bottle and the reference bottle and keep them in a safe
place nearby the compressor.
4. Take the ISO 7-R ½ connection and the G ¼ ball valve with seal and screw them into the corresponding
threads in the drain plate at the bottom right of the compressor front panel (Drain plate). Close the
condensate sample valve.
Instruction book
2920 7109 60 127
To Next Page
Loading...
