11 Technical data
11.1 Readings on display
Elektronikon® controller
Elektronikon® Graphic controller
Important
The readings mentioned below are valid under the reference conditions (see section
Reference conditions and limitations).
Reference Reading
Air outlet pressure Modulates between programmed unloading and loading pressures.
Compressor element
outlet temperature
For air-cooled units: approx. 60 ˚C (108 ˚F) above cooling air inlet temperature
For water-cooled units: approx. 60 ˚C (108 ˚F) above cooling water inlet
temperature.
Dewpoint temperature See section Compressor data.
Cooling water outlet
temperature
Below 50 ˚C (122 ˚F).
Instruction book
2920 7109 60 187
To Next Page
Loading...
