Atlas Copco GA 75+ - Pressure Band Settings: Calling Up and Modifying

3.19 Calling up/modifying pressure band settings
Calling up the settings
Starting from the Main screen:
• Press Scroll button (12) until <P.04> is shown and then press Enter button (13). Pressure band 1 (<Pb.1>)
is shown on the display. Button (12) can be used to scroll to pressure band 2 (<Pb.2>).
• Press Enter button (13) on the desired pressure band. The load level of the selected pressure band appears.
Button (12) can be used to scroll to the unload level.
Loading pressure
Instruction book
2920 7109 60 47