9.5 Oil and oil filter change
Warning
The operator must apply all relevant Safety precautions.
Always drain the compressor oil at all drain points. Used oil left in the compressor can
contaminate the oil system and can shorten the lifetime of the new oil.
Never mix lubricants of different brands or types as they may not be compatible and the
oil mix will have inferior properties. A label, indicating the type of oil filled ex-factory, is
stuck on the air receiver/oil tank.
If the compressor is equipped with an Energy Recovery system, also consult Maintenance
for Energy Recovery Systems.
Procedure
Oil drain and filler plug on the oil separator vessel
Instruction book
2920 7109 60 177
To Next Page
Loading...
