3.12 Calling up module hours
Control panel
Starting from the Main screen, press Scroll button (12) until <d. 3> is shown and then press Enter button (13).
A screen similar to the following appears:
In the example shown, the screen shows the unit used (hrs) and the value (5000): the regulator module has
been in service during 5000 hours.
3.13 Calling up loading hours
Starting from the Main screen:
• Press Scroll button (12) until <d.4> is shown and then press Enter button (13):
The screen shows the unit used <hrs> (or <x1000 hrs>) and the value <1755>: the compressor has been
running loaded during 1755 hours.
3.14 Calling up load relay
Starting from the Main screen:
Instruction book
2920 7109 60 41
To Next Page
Loading...
