• Using the Scroll keys, move the cursor to the Info icon (see above, section Menu icon).
• Press the Enter key. The Atlas Copco internet address appears on the screen.
4.15 Week timer menu
Control panel
(1) Scroll keys
(2) Enter key
(3) Escape key
Menu icon, Week timer
Function
• To program time-based start/stop commands for the compressor
• To program time-based change-over commands for the net pressure band
• Four different week schemes can be programmed.
• A week cycle can be programmed, a week cycle is a sequence of 10 weeks. For each week in the cycle,
one of the four programmed week schemes can be chosen.
Instruction book
98 2920 7109 60
To Next Page
Loading...
