Flow diagram, GA Workplace Full-Feature
Reference Description
A Intake air
B Air/oil mixture
C Oil
D Wet compressed air
E Condensate
F Dried compressed air
Note: The cooling fan is not provided on water-cooled compressors.
Description
Air drawn through filter (AF) and open inlet valve (IV) of unloader is compressed in compressor element (E).
A mixture of compressed air and oil flows into the air receiver/oil separator (AR) via check valve (CV). The
air is discharged through outlet valve (AV) via minimum pressure valve (Vp) and air cooler (Ca).
The air cooler is provided with a moisture trap (MT).
On Full-Feature compressors, the air flows through air dryer (DR) before it is discharged through outlet valve
(AV). Also see section Air dryer.
Instruction book
2920 7109 60 17
To Next Page
Loading...
