Electrical shock, precautions
DANGER Electrical shock
Any contact of the hydraulic attachment with
electric circuits or other sources of electricity will
lead to an electric shock, resulting in serious injury
or death. The hydraulic attachment is not
electrically insulated.
►
Never work in the vicinity of electric circuits or
other sources of electricity.
►
Make sure that there are no hidden circuits in
the work area.
►
Check wiring diagrams.
Falling stones, precautions
WARNING Fragments flying around
Fragments of material which come loose while
operating the hydraulic attachment may be flung
away and can cause serious injury if people are hit
by them. Small objects falling from a great height
can also cause serious damage.
During hydraulic attachment operation the danger
zone is considerably greater than during the
excavation operation due to fragments of stone
and pieces of steel flying around, and for this
reason the danger zone must, depending on the
type of material to be worked on, be enlarged
correspondingly, or secured in a suitable manner
through corresponding measures.
►
Secure the danger zone.
►
Stop the hydraulic attachment immediately if
anyone enters the danger zone.
►
Close the windscreen and the side windows of
the driver's cab.
Emissions, precautions
WARNING Noise hazard
Operating the hydraulic attachment creates a loud
noise. Long term high sound pressure level can
affect your hearing.
►
Wear suitable hearing protection.
WARNING Lung disease
Dust may be generated when operating the
hydraulic attachment. If dust from rocks or silica
dust, produced when operating the hydraulic
attachment on rocks, concrete, asphalt or other
such materials, is inhaled this may lead to silicosis
(dust lungs, a severe lung disease). Silicosis is a
chronic disease which may lead cancer and death.
►
Wear a suitable breathing mask.
HB 2000, 2000 DP, 2500, 2500 DP Safety and operating instructions
© Construction Tools GmbH | 3390 5090 01 | 2016-05-23
Original instructions
13
To Next Page
Loading...
Need help?
General
