Manual lubrication
Manual lubrication is required if the automatic
lubrication system fails to work.
◆
Place the hydraulic breaker at a right angle on
the working tool and exert pressure.
◆
Only use chisel paste for lubrication.
◆
Put the manual grease gun on the grease
nipple of the emergency lubrication system and
inject chisel paste.
•
Lubrication interval: approx. every 2 hours
•
Hydraulic breaker without DustProtector:
5 to 15 strokes from the manual grease gun
•
Hydraulic breaker with DustProtector:
5 to 10 strokes from the manual grease gun
Chisel paste filling device
Construction Tools GmbH offers a device for
refilling empty cartridges. This can be mounted on
a 15-kg or 45-kg hobbock to fill empty cartridges
as required.
500-g chisel paste cartridges
packed per 12 cartridges:
part number 3363 0912 00 for ContiLube
®
II
Manual grease gun for ContiLube
®
II cartridges:
part number 3363 0345 67
15-kg chisel paste container,
part number 3362 2639 00
Filling device for use with 15-kg containers:
part number 3363 0946 69
45-kg chisel paste container,
part number 3362 2632 75
Filling device for use with 45-kg containers:
part number 3363 0664 11
For further information, please contact the Atlas
Copco Customer Center/Dealer in your area.
Safety and operating instructions HB 2000, 2000 DP, 2500, 2500 DP
46 © Construction Tools GmbH | 3390 5090 01 | 2016-05-23
Original instructions
To Next Page
Loading...
Need help?
General
