Transport using a truck
WARNING Hydraulic attachment tipping
over / slipping
The hydraulic attachment slipping or tipping over
and falling from the loading area of a lorry may
cause serious injury.
►
Place the hydraulic attachment on a pallet.
►
Strap the hydraulic attachment to the pallet
using suitable strapping (see illustration in
chapter Transport using a forklift truck).
►
Place the pallet with the hydraulic attachment
on an anti-slip mat.
►
Secure the hydraulic attachment to the loading
area with ropes or chains; use any available
transport lugs.
◆
Secure the hydraulic attachment on the pallet
and the loading surface as shown in the
following illustration.
◆
Observe all the applicable national/regional
regulations on securing loads.
HB 2000, 2000 DP, 2500, 2500 DP Safety and operating instructions
© Construction Tools GmbH | 3390 5090 01 | 2016-05-23
Original instructions
21
To Next Page
Loading...
