Disposal
NOTICE Environmental damage due to
consumables
Hydraulic oil and chisel paste are environmentally
harmful and must not penetrate the ground or
enter the water table or water supplies.
►
Collect any such consumables which may
escape.
►
Dispose of them in accordance with the
applicable environmental regulations.
Hydraulic breaker
◆
Remove the hydraulic breaker from the carrier
(see chapter Removing the hydraulic
attachment from the carrier).
◆
Release the gas from the piston accumulator
(see chapter Release the pressure from the
piston accumulator).
◆
Remove the working tool (see chapter Working
tool/Removal).
◆
Remove the adapter plate (see chapter
Removing the adapter plate).
◆
Remove the hydraulic hoses from the hydraulic
breaker.
◆
Clean the hydraulic breaker (see chapter
Cleaning).
◆
Before disposal the HP-accumulator must be
depressurised. This must be done by an
authorized person. Contact the Atlas Copco
Customer Center/dealer in your area.
◆
Dispose of the hydraulic breaker in line with all
applicable regulations or consult an authorised
and specialised recycling company.
Hydraulic hoses
◆
Drain the hydraulic oil from the hydraulic hoses
and collect it.
◆
Dispose of the hydraulic hoses in accordance
with the applicable regulations to avoid
environmental hazards.
Hydraulic oil
◆
Collect any hydraulic oil that escapes.
◆
Dispose of it in accordance with the applicable
environmental regulations.
Chisel paste and grease
cartridges
◆
Dispose of chisel paste and not completely
emptied grease cartridges in accordance with
the applicable regulations.
◆
Completely emptied grease cartridges can be
recycled.
HB 2000, 2000 DP, 2500, 2500 DP Safety and operating instructions
© Construction Tools GmbH | 3390 5090 01 | 2016-05-23
Original instructions
65
To Next Page
Loading...
Need help?
General
