Transport using a crane
◆
Secure the hydraulic attachment with ropes or
chains as shown in the following illustration.
◆
Slowly lift the hydraulic attachment.
◆
Place the hydraulic attachment on timber
support blocks.
Transport using a forklift
truck
WARNING Hydraulic attachment tipping
over
The hydraulic attachment tipping off the fork of the
forklift truck or the pallet may cause serious injury.
►
Place the hydraulic attachment on a pallet.
►
Strap the hydraulic attachment to the pallet
using suitable strapping, as shown in the
illustration below.
►
Move the fork of the forklift truck under the
pallet so that the centre of gravity is between
the prongs.
◆
Move the fork of the forklift truck under the
pallet so that the hydraulic attachment cannot
tip over.
◆
Slowly lift the pallet with the hydraulic
attachment.
◆
Transport the pallet with the hydraulic
attachment to the location provided for.
Safety and operating instructions HB 2000, 2000 DP, 2500, 2500 DP
20 © Construction Tools GmbH | 3390 5090 01 | 2016-05-23
Original instructions
To Next Page
Loading...
