Qualification
Transporting the hydraulic attachment is only
permitted if carried out by people who:
•
are authorised to operate a crane or a forklift
truck according to the applicable national
provisions,
•
know all the relevant national/regional safety
provisions and accident prevention rules,
•
have read and understood the safety and
transport chapter of these Safety and operating
instructions.
Installing, maintaining, storing and disposing of
the hydraulic attachment are only permitted if
carried out by people who:
•
know all the relevant national/regional safety
provisions and accident prevention rules,
•
have read and understood these Safety and
operating instructions.
Operating the hydraulic attachment is only
permitted if carried out by qualified carrier drivers.
Carrier drivers are qualified if they:
•
have been trained to operate a carrier
according to the national regulations,
•
know all the relevant national/regional safety
provisions and accident prevention rules,
•
have read and understood these Safety and
operating instructions.
Testing the hydraulic installation is only
permitted if carried out by professionals.
Professionals are people who are authorised to
approve a hydraulic installation for operation
according to the national regulations.
Repairing the hydraulic attachment is only
permitted if carried out by professionals trained by
Construction Tools GmbH. These professionals
must have read and understood these Safety and
operating instructions. They must follow all safety
instructions and guidelines for repair. Otherwise
the operational safety of the hydraulic attachment
is not guaranteed.
Intended use
Only attach the hydraulic breaker to a hydraulic
carrier of a suitable load-bearing capacity.
Only use the hydraulic breaker function of the
device to break or fragment concrete, stone and
rocks.
Using the hydraulic breaker in and under water, in
tunnels, under the ground and for hot applications
is only possible if it has been fitted out with special
safety equipment.
Intended use also implies observing all instructions
in these Safety and operating instructions.
Use other than intended
Never operate the hydraulic breaker in an
environment where there is a risk of explosions.
Explosions will result in serious injury or death.
Never use the hydraulic breaker
•
to transport or lift objects.
The lifted object can fall and cause serious
injuries or death.
•
as a sledge hammer.
This will damage the hydraulic breaker, the
working tool and the carrier.
•
as a crowbar.
This can cause the working tool to break.
•
to push debris
This damages the hydraulic breaker.
HB 2000, 2000 DP, 2500, 2500 DP Safety and operating instructions
© Construction Tools GmbH | 3390 5090 01 | 2016-05-23
Original instructions
9
To Next Page
Loading...
Need help?
General
