- 24 -
5. Once the light tower is correctly positioned, install
a suitable earthing (e.g. the optional earth pin (7))
and make sure that it is correctly connected to the
light tower.
For more detailed installation instructions, see also
“Installation” on page 27.
3.2.3 Positioning for transport
1. Make sure the mast is lowered completely and
turned 90° (1). See also “Lowering the mast” on
page 33.
2. Make sure that the jockey wheel (if available) is
safely fastened by its own locking lever to ensure
that the light tower is still stable once the
stabilizing feet are removed.
3. Adjust the height of the support leg/jockey wheel
using the handle (2) on top. The support leg/
jockey wheel (3) should never touch the ground
once the light tower is coupled to the hook of the
towing vehicle.
4. Retract the 4 feet (4) and the stabilizers and ensure
their locking pins following the reverse order of
the procedure described in “Positioning the light
tower” on page 23.
00_00_HiLight H6+_EN.book Page 24 Friday, June 4, 2021 11:52 AM
To Next Page
Loading...
Need help?
General
