Atlas Copco HiLight H6+ Kd ESF User Manual

- 50 -
5.4.2.2 Changing the engine oil
1. Start the engine and let it run for a while to warm
up.
2. Stop the engine.
3. Remove the plug (1) from the oil drain hose (2).
4. Blow the oil filter with clean air (see chapter
“Cleaning the oil filter”).
5. Reinstall the plug (1) with a new sealing washer
and tighten it.
6. Pour in engine oil.
5.4.2.3 Cleaning the oil filter
1. Remove the oil filter (1).
2. Replace the upper gasket (2) and slightly oil the
upper and lower gaskets (2, 3) before reinstalling
them.
3. Reinstall the oil filter (1).
1
2
1
2
3
00_00_HiLight H6+_EN.book Page 50 Friday, June 4, 2021 11:52 AM

Atlas Copco HiLight H6+ Kd ESF Specifications

General

Brand	Atlas Copco
Model	HiLight H6+ Kd ESF
Category	Lighting Equipment
Language	English