Atlas Copco HiLight H6+ Kd ESF - Page 64

- 64 -
Delayed Over Current The measured current has risen above the configured trip level for a configured duration.
Low Current
The measured current has fallen below the configured trip level. This is used to detect lamp
failure.
Oil Filter Maintenance Alarm Maintenance due for oil filter.
Air Filter Maintenance Alarm Maintenance due for air filter
Fuel Filter Maintenance Alarm Maintenance due for fuel filter.
Alternator overheating (only for HiLight H6+ DC) Overheating triggers PGM thermal switch input of the controller.
Display Description Reason
C
00_00_HiLight H6+_EN.book Page 64 Friday, June 4, 2021 11:52 AM