5.5 Taking out of operation
Procedure
1. Stop the compressor and close the air outlet valve.
2. Switch off the voltage and disconnect the compressor from the mains.
3. Depressurize the compressor.
4. On Full-Feature units and on compressors with an air receiver, open the manual drain valve(s)
(Dm / Dm1).
5. If provided, shut off and depressurize the part of the air net which is connected to the outlet
valve. Disconnect the compressor from the air net.
6. If provided, disconnect the compressor condensate piping from the local condensate drain
system.
7. Before moving the unit, reinstall the red transport brackets.
Instruction book
2920 7219 10 61
To Next Page
Loading...
