Symbol Title and indication
Alarm
Indicates that a system of the unit is in an abnormal condition.
Alarm
1. In manual control (when monitoring the skin temperature): Indicates that the skin temperature
has become 40°C or higher.
2. In servo control: Indicates that the skin temperature deviates from the set temperature by 1.0°C
or by 0.5°C.
Alarm
Indicates that a wire of the skin temperature probe has snapped or short-circuited.
Alarm
Indicates that 15 minutes have elapsed since the heater was turned on.
Alarm
Indicates that the canopy is tilted.
Setting
Indicates a setting of the skin temperature.
Skin temperature
Indicates a detected current skin temperature of the infant.
Heater
Indicates the manual control mode, the manual control mode switch and the heater output.
Skin temperature
Indicates the servo control mode, the servo control mode switch and the skin temperature probe
connecting port.
Preheat
Indicates the preheat mode and the preheat mode switch.
Peripheral temperature
Indicates the function related to the infant's peripheral temperature (skin temperature 2).
Temperature unit
Indicates the switch to select either °C or °F as the unit of the temperature to be displayed.
Timer
Indicates the timer.
Timer
Indicates the timer switch.
SpO2
Indicates the alarm limit selector switch.
To Next Page
Loading...
