Power Outlet and Grounding3-4.
The power outlet should be located near the unit to prevent accidental contact with a trailing power
cord. Use a separate power outlet for each unit.
Do not put many loads on one power outlet.
In order to complete the ground connection, connect the power cord only to a properly grounded
3P power outlet.
Do not operate the unit if you have any doubt about its ground connection.
Ground peripheral electric equipment securely.
The electrical rating of this unit is as follows:
AC120V; power consumption 700VA; frequency 60Hz; operating voltage range AC120V±10%
Do not connect the unit to any other power source.
The unit should be serviced only by qualified personnel.
Power Cord and Power Switch3-5.
(1) Connect the power cord to the AC inlet. Then con-
nect the power plug on the other end of the power
cord to the power outlet.
Press the power switch to turn the power on.(2)
To Next Page
Loading...
