To Next PageTo Next PageHow to fix the Atom Infa Warmer i Medical Equipment if the mattress temperature doesn't rise?
If the mattress temperature isn't rising, check that the heater output isn't set too low, the supply voltage isn't low (avoid sharing the outlet), and the ambient temperature isn't too low (it should be around 20~30°C).
What to do if the lighting lamp on the Atom Infa Warmer i Medical Equipment doesn’t come on?
If the lighting lamp doesn’t come on, check that the light control switch is on, ensure the power cord is securely connected to the outlet, and check the hospital breaker.
Why is the temperature on the Atom Medical Equipment mattress rising too high?
If the mattress temperature is rising too high, check that the heater output isn't set too high and that the unit isn't exposed to direct sunlight or a nearby heating apparatus.
How to stabilize the temperature on the Atom Infa Warmer i mattress?
To stabilize the mattress temperature, ensure the ambient temperature is stable (around 20~30°C) and that the unit isn't exposed to excessive drafts.
Defines the purpose and application of the Infa Warmer i radiant warmer.
Essential guidelines for the safe operation and maintenance of the unit.
Explains the meaning of DANGER, WARNING, and CAUTION notices.
Details symbols indicating general attention, hot surfaces, and prohibitions.
Explains symbols for general instructions, grounding, and IEC standards.
Covers symbols for bell silenced, caution, electrostatic discharge, and lighting.
Measures to prevent electronic interference and ensure unit reliability.
Defines user responsibilities for care and prohibits unauthorized modifications.
Critical instructions to prevent death, serious injury, or severe damage.
Key warnings regarding fire, electric shock, and oxygen use.
Cautions regarding environment, handling, and installation safety.
Identifies all parts of the main unit, including the canopy and heater.
Details the support column features and operation panel connections.
Explains the symbols and functions displayed on the operation panel.
Describes controls for temperature settings and timer functions.
Explains displays for SpO2, pulse rate, and signal quality.
Guidelines for selecting an appropriate installation location and environment.
Instructions for locking casters and adjusting the unit's height.
Proper connection of the power cord, outlet requirements, and grounding.
Daily checks to ensure the unit is safe and functional before operation.
How to set and adjust the heater output manually for infant warming.
Using the preheating feature to warm the mattress surface before infant placement.
Attaching and using skin temperature probes for monitoring infant temperature.
Setting and maintaining infant skin temperature using servo control mode.
Proper procedures for attaching the sensor to the patient.
Configuring upper and lower alarm limits for SpO2 and pulse rate.
Adjusting sensor sensitivity for different patient conditions with Masimo.
Configuring averaging time and SatSeconds limits for Nellcor pulse oximetry.
Safe procedures for tilting the mattress platform and securing baby guards.
Using the unit's timer for Apgar scoring or CPR timing.
Connecting external computers for data recording via the I/O port.
Controlling the lighting intensity and rotating/tilting the canopy.
Operating the baby guards and mounting accessories on support rails.
Instructions for drawing out and setting the X-ray cassette tray.
Adjusting the audible alarm volume to desired levels.
Setting temperature deviation limits for temperature alarms.
Customizing the audible feedback for button presses.
Procedures for cleaning the primary unit components with disinfectants.
Instructions for cleaning baby guards, lamps, probes, and the mattress.
Daily checks to ensure proper functionality and safety before operating.
Scheduled inspections for maintaining unit performance and identifying wear.
A comprehensive checklist for pre-use and periodic unit inspections.
Guidelines for the proper disposal of the unit and its components.
Describes alarms for set temperature deviations, heat, and baby checks.
Details alarms for SpO2, pulse rate, sensor status, and interference.
Explains alarms for system errors, wire faults, and power interruptions.
Steps to resolve issues like no display, temperature instability, or lighting failures.
Electrical, environmental, and physical specifications of the main unit.
Technical details for the Masimo pulse oximeter functionality.
Technical details for the Nellcor pulse oximeter functionality.
General| Brand | Atom |
|---|---|
| Model | Infa Warmer i |
| Category | Medical Equipment |
| Language | English |
