EasyManua.ls Logo

ATX 125 - Gasoline and Exhaust Fumes; Modifications

ATX 125
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Start slowing earlier as you approach a stop.
Maintain a larger cushion of space ahead and to the sides.
Wait for larger gaps when you want to cross, enter or merge
into traffic.
Gasoline and exhaust fumes
Gasoline is highly flammable and exhaust fumes are poi-
sonous:
Turn off engine before refueling.
Do not overfill fuel tank!! Fill fuel level to 1/2 inch below the
neck of the fuel tank fill opening.
Do not spill any gasoline on the engine, exhaust system or
plastic parts.
Do not refuel while smoking or near any open flame.
If you swallow gasoline, inhale gasoline vapor or spill gaso-
line in your eyes, seek medical help immediately.
If you spill gasoline on your clothes, change and wash the
affected area immediately with soap.
Do not operate your motorcycle in a closed area as the ex-
haust fumes may cause loss of consciousness or death within a
short time.
Caution
To avoid scalding by muffler, do not park the vehicle near walkways.
Passenger should pay special attention to avoid exhaust burns.
Hay or other flammable items will create fire if too close to the ex-
haust system.
Modifications
Any modifications to this motorcycle, removal of original equip-
ment or use of unapproved accessories, may cause it to be
unsafe for use and may trigger severe accidents. Some modifi-
cations may also make your motorcycle illegal to use on public
roadways, and will void all warranty coverage.
Your genuine dealer is familiar with all recommended accesso-
ries for your motorcycle, and should be your primary source for
purchasing and installing any accessories. The owner of the
motorcycle is responsible for the safety, installation and usage
of any accessories not approved by Genuine.
Before installing new accessories, make sure they do not inter-
fere with moving parts, reduce ground clearance, and do not
interfere with the operating controls.