EasyManua.ls Logo

ATX 125 - Fuel-Saving Tips

ATX 125
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Fuel-Saving tips
The way you drive your motorcycle will have a direct impact on
your fuel consumption.
Drive at appropriate speed and avoiding sudden acceleration
or braking. Fluent motorcycle operation is not only important for
your safety and fuel economy, but also extends the usable life of
your motorcycle.
Driving within allowed speed limits will yield optimum fuel
economy.
Always maintain tires at recommended pressure. Check
pressure prior to each ride.
Have your motorcycle inspected and serviced according to
the periodic service and maintenance table.
Check that brakes are not dragging and preventing the
wheels from turning freely. Avoid riding with the rear brake pedal
pressed.
Turn off the engine if waiting for more than a few minutes.
Do not fill up fuel tank above cap neck.
This instruction book illustrates the notes for the standard and
safe operation method, and basic maintenance.
To ensure a comfortable and safe riding experience, please
read this instruction book carefully.
The pictures and illustrations in this book may be different from
the actual vehicle, due to cosmetic differences between models.
The vehicle is specifically designed for a maximum of two peo-
ple (Including the rider himself)
Caution
Do not use contaminated fuel
Using contaminated fuel may possibly cause rust inside the fuel tank,
which in turn can block fuel lines causing failure to the EFI system, or
even cause severe damage to the engine.
Do not use sub-standard or polluted engine oil
Always use the specified grade of engine oil, so the engine
s per-
formance and longevity can be ensured.
Any failures as a result of the use of inappropriate fluids are not
covered under warranty.