14
IV. CONTROLS
1. Ignition Switch
Main Switch used to Start or switch off the engine.
To stop the vehicle (switching off
all circuits)
Can
For starting or driving the vehi-
cle(making all the main circuits)
Can not
To lock the steering handle Can
The motorcycle comes with a steering lock located on the ignition
switch. Lock the steering as follows:
• Turn handlebar to the left
• Insert key in the ignition switch set to .
• Press the key in) and turn it anticlockwise to position .
Remove the key to unlock the steering lock, reverse the above
procedure.
CAUTION
Do not change the ignition key position when riding.
If the key is moved to the position during riding, all electrical
systems will be off. While riding, do not remove the main switch key
in order to avoid an accident. If necessary, stop the motorcycle
prior to removing the key.
Before removing the key, make sure the handle bar is locked.
If the engine is not started after turning the key to the position, the
battery will discharge over time.
Do not use sharp metal keys or key fobs to avoid scratching the
upper triple clamp. Use a cloth or leather key fob.
To Next Page
Loading...