26
VI. Inspection and maintenance
The following table shows the interval of regular maintenance in travel distance or number of months. At the end of an interval, be
sure to carry out the specified inspection, lubrication and maintenance. If your motorcycle is used with heavy loads, such as high power
driving in a dusty environment, the maintenance shall be carried out more frequently. Your distributor can give your further guide. The
parts of steering gear, shock absorber, bearings and wheels are critical components, and require professional skills to repair. In the light of
safety, it is advisable to the inspection and maintenance done by your distributor or qualified maintenance staff.
Be sure to make regular maintenance thoroughly according to the instructions in the manual.
Maintenance Period Table Continued on next page
Precaution
In regular maintenance, it may be necessary to replace one or more parts. For part replacement, it is advisable to use
genuine parts or equivalent products. No matter if you are experienced in vehicle maintenance or not, the items with * mark shall
be handled by your distributor or qualified maintenance staff. For the items without such mark, you can do it by yourself according
to the instructions.
Warning
After correct running-in of 1000 km, maintenance is mandatory to ensure the safety of your motorcycle and give it a full play
of its performance.
To Next Page
Loading...