EasyManua.ls Logo

ATX 125 - Replacement of Fuse

ATX 125
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
2) Never fill in tap water, because this will shorten the accu-
mulator’s life span.
3) To dismantle battery disconnect the negative (-) electrode
before the positive (+) one, and vice versa in
tion .Ensure against any contact of the positive (+) elec-
trode with the vehicle body.
4) Never have the electrolyte level come over the upper mark
line when adding distilled water .Otherwise overflow and
corrosion will occur.
5) The electrolyte contains sulfuric acid and will cause serious
hurt to skin and eyes by contact. In case of contact with it,
wash it off for 5 minutes and see a doctor immediately.
6) Foreign matter should be prevented from entering into the
battery during dismounting and installation.
7) The breathing pipe must be kept unblocked
12. Replacement of fuse
Negative (-) Connector Positive (+Connector