EasyManua.ls Logo

ATX 125 - Maintenance Prior to Storage; Return to Service

ATX 125
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
16. Maintenance Prior to Storage
If the motorcycle will be stored for a long period of time, pay
attention to the prevention of moisture, sunshine and rain in order
to protect it from unnecessary damage. Special check- ups
should be carried out on those important parts and sub- assem-
blies before storage.
1) Change the oil
2) Grease the chain.
3) Remove the battery and place in a cool and well- ventilated
area. The battery should be charged at least once a month to
prevent it from becoming discharged and malfunction.
4) Clean the motorcycle and apply anti-corrosion to parts
vulnerable to rust.
5) Drain the fuel if possible, use fuel stabilizer if draining fuel
tank is not possible.
6) Remove the ignition key.
7)
Cover the motorcycle
.
17. Return to Service
1) Remove the cover and clean the motorcycle. Change the
oil if the vehicle has not been used for over 4 months.
2) Charge the battery and re-install.
3) Fill the tank with fresh fuel.
4) Prior to driving, test the motorcycle at a low speed and in a
safe place.