EasyManua.ls Logo

ATX TranScend - PON EDFA CLI Commands

Default Icon
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CRAFT LINE INTERFACE (CLI)
TranScend Chassis – Operation Manual 5-5
NOTE: TranScend chassis is con gured to factory time prior to shipment. It does not make local
time adjustment (e.g. daylight saving time) automatically.
Hostname: Displays or con gure the system hostname.
Example #1: In this example, user requested to con gure the hostname “InnoTrans”. And the system indicates the
command execution as “Successful”.
Transcend[slot-1] >hostname InnoTrans
Successful
Community: Displays or con gures the SNMP community string. Up to three community strings are supported. The system
default community string is “public” with read only permission.
Example #1: In this example, user requested to add a community string “inno” with read-write permission. And the
system indicates the command execution as “Successful”.
Transcend [slot-1] >community add inno rw
Successful
Exampel #2: In this example, user requested to add a community string name “inno” with read-only permission.
And the system indicates the command execution as “Successful”
Transcend [slot-1] >community add inno
Successful
TrapAddr: Displays or con gures the SNMP trap destination IP addresses. Up to two trap addresses are supported.
Example #1: In this example, user requested to add a trap destination, 192.168.1.137. And the system indicates
the command execution as “Successful”.
Transcend [slot-1] >trapaddr add 192.168.1.137
Successful
sysContact: Displays or con gures the SNMP system contact information.
Example #1: In this example, user con gures the SNMP system contact information as “snmp@inno-trans.com”.
And the system indicates the command execution as “Successful”.
Transcend [slot-1] >sysContact snmp@inno-trans.com
Successful
SysLocation: Displays or con gures the SNMP system location information.
Example #1: In this example, user con gures the SNMP system location information as “Bldg 10, San Jose, CA”.
And the system indicates the command execution as “Successful”.
Transcend [slot-1] >sysLocation bldg 10, San Jose, CA
Successful
CHAPTER 5:

Table of Contents

Other manuals for ATX TranScend