How to fix Power LED OFF (AC) on ATX TranScend?
If the AC power LED on your ATX Chassis is off, first ensure that the power cable is properly plugged in and the power switch is in the ON position. Then, verify that the AC outlet is functional and check the fuse on the AC feed; replace the fuse if needed. Finally, check for other signs of activity, such as a running fan or an active LCD display.
What to do if Power LED OFF (DC) on ATX TranScend Chassis?
If the DC power LED on your ATX Chassis is off, ensure that the DC feed is active and the fuse on the fuse panel is intact. Next, verify that the DC feed is not reversed. Finally, check for other signs of activity, such as a running fan or an active LCD display.
Details the four possible LED colors (Off, Green, Amber, Red) and their meanings.
Explains the general principles of how buttons control chassis operations.
Describes the specific functions of Up, Down, Left, Right, and Select buttons.
Explains the hierarchical structure of the LCD menu system.
Details the greeting message and system-level menus accessible via the LCD.
Explains how plug-in modules have their own display structures within the LCD menu.
Details the LCD menu structure for the High Sensitivity Quad Return Receiver.
Details the LCD menu structure for the PON EDFA module.
Details the LCD menu structure for the Quad Return Receiver module.
Details the LCD menu structure for the Destacker Proxy module.
Details the LCD menu structure for the I-HUB Proxy module.
Details the LCD menu structure for the Stacker module.
Details the LCD menu structure for the Optical Switch module.
Details the LCD menu structure for the Forward Receiver module.
Details the LCD menu structure for the RF Switch module.
Details the LCD menu structure for the AGC-EDFA module.
Details the LCD menu structure for the Transceiver module.
Details the LCD menu structure for the High Sensitivity Opto-Stacker module.
Details the LCD menu structure for the Direct Forward Transmitter (DFB Tx) module.
Details the LCD menu structure for the Opto-Stacker module.
Describes the hierarchical structure of CLI commands, similar to the LCD menu.
Lists and describes system-related commands like help, uptime, and info.
Shows chassis alarms, available slots, and module types, linking to slot details.
Allows users to enter and execute system commands through the GUI.
General| Color | Black |
|---|---|
| Expansion Slots | 7 |
| Motherboard Compatibility | ATX, Micro-ATX, Mini-ITX |
| Material | Steel |
| Cooling | 3 x 120mm Fans |
To Next Page
