ATX TranScend - Page 90

SNMP ENTERPRISE ATTRIBUTES
8-8 TranScend Chassis – Operation Manual
::= { innoTransTranscendModuleLaserEntry 2 }
itModuleLaserTemp OBJECT-TYPE
SYNTAX HeTenthCentigrade
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Laser temperature in tenth of Centigrade.”
::= { innoTransTranscendModuleLaserEntry 3 }
itModuleLaserPowerWt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Laser Power in tenth of milliWatt.”
::= { innoTransTranscendModuleLaserEntry 4 }
itModuleLaserPowerdBm OBJECT-TYPE
SYNTAX HeTenthdBm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Laser power in tenth of dBm.”
::= { innoTransTranscendModuleLaserEntry 5 }
itModuleLaserWavelength OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Laser wavelength.”
::= { innoTransTranscendModuleLaserEntry 6 }
itModuleLaserGainOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Gain offset in steps.”
::= { innoTransTranscendModuleLaserEntry 7 }
itModuleLaserGainControl OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Module gain control mode.”
::= { innoTransTranscendModuleLaserEntry 8 }
itModuleAmpPumpPower OBJECT-TYPE
CHAPTER 8: