ATX TranScend - Page 92

SNMP ENTERPRISE ATTRIBUTES
8-10 TranScend Chassis – Operation Manual
STATUS current
DESCRIPTION
“Optical power in tenth of dBm.”
::= { innoTransTranscendModuleLaserEntry 15 }
itModule3V3Power OBJECT-TYPE
SYNTAX HeTenthVolt
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“3.3 v power reading in tenth of volt.”
::= { innoTransTranscendModuleLaserEntry 16 }
itModuleOpticalModulationIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Optical modulation index.”
::= { innoTransTranscendModuleLaserEntry 17 }
itModuleGainReserve OBJECT-TYPE
SYNTAX HeTenthdB
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Gain reserve in tenth of dB.”
::= { innoTransTranscendModuleLaserEntry 18 }
itModuleAttenuation OBJECT-TYPE
SYNTAX HeTenthdB
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Attenuation settings in tenth of dB.”
::= { innoTransTranscendModuleLaserEntry 19 }
itModuleSwitch OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Switch position.”
::= { innoTransTranscendModuleLaserEntry 20 }
itModuleMode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Module mode - switch control mode, frequency channel mode, etc.”
CHAPTER 8: