ATX TranScend - Page 95

SNMP ENTERPRISE ATTRIBUTES
TranScend Chassis – Operation Manual 8-13
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
“The integer object reports the module index number.
For a non-chassis system, it is always 0. For a chassis system
with modules, it starts from 1.”
::= { iTTranscendNoticationObjects 4 }
--
-- Notication: System
--
notifSystemTemp NOTIFICATION-TYPE
OBJECTS { notifyObjectIndex, notifyObjectValue, notifyAlarmState,
notifyModuleIndex }
STATUS current
DESCRIPTION
“The notication of system temperature alarm”
::= { iTTranscendNotication 30 }
notifPower NOTIFICATION-TYPE
OBJECTS { notifyObjectIndex, notifyObjectValue, notifyAlarmState }
STATUS current
DESCRIPTION
“The notication of system power alarm”
::= { iTTranscendNotication 31 }
notifFan NOTIFICATION-TYPE
OBJECTS { notifyObjectIndex, notifyObjectValue, notifyAlarmState }
STATUS current
DESCRIPTION
“The notication of fan alarm”
::= { iTTranscendNotication 32 }
notifModulePresence NOTIFICATION-TYPE
OBJECTS { notifyObjectIndex, notifyObjectValue, notifyAlarmState,
notifyModuleIndex }
STATUS current
DESCRIPTION
“The notication of module presence status alarm”
::= { iTTranscendNotication 33 }
--
-- Notication: Module
--
notifLaserTemp NOTIFICATION-TYPE
OBJECTS { notifyObjectIndex, notifyObjectValue, notifyAlarmState,
notifyModuleIndex }
STATUS current
DESCRIPTION
“The notication of laser temperature alarm. There are 4 lasers in the
system. The notifyObjectIndex is
CHAPTER 8: