Copyright © WUHAN AU3TECH TRADING CO., LTD
SC1000 Fiber Laser Cutting CNC System User’s Manual Version： V1.00
Preface
Introduction
This archive mainly describes about the interface, functions and operations of the fiber laser cutting
CNC system software (We call it: SC1000). And if you want to know more about installation and
debugging, please reference to Fiber Laser Cutting CNC System Quick Setup. Before you use it and
its relevant equipment, please read it carefully which can help you use it more conveniently. And since
our product are keeping updating, so this manual cannot fully match in all aspects with the product, hope
you can understand.
Readers
This manual mainly for those people below:
Installation / debugging engineer
Maintenance engineer
Operator
The meaning of symbols
It means high potential risk, if can’t avoid, which can result in seriously damaging
to equipment or even hurting people.
It means medium or low potential risk, if can’t avoid, which can result in slightly
or moderately damaging to equipment or hurting people.
It means potential risk, if ignore this manual, which can result in damaging the
equipment, losing all the data or some unpredictable results.
It means can help you solve some problem or save your time.
It means additional information, which emphasizes and supplements the main
part of manual.
Modification record
Modification record accumulates each updated descriptions of this archive. The newest updated
archive includes all the updated contents of the old version.
To Next Page
Loading...
