1 Introductions
1.1 Introduction of products
SC1000 is a flat fiber laser cutting CNC system software which includes graphic drawing and editing,
cutting process dealing, cutting process controlling, system monitoring, components monitoring and
debugging, and so on.
Features:
1) Operations are simple but functions are powerful.
Developed based on RIBBON framework, software is not only beautiful but also easy to operate.
UI design is more humanize, which is easier to use without training.
With powerful CAM functions based on AUTOCAD design, support graphic import, graphic drawing,
graphic editing, and graphic transformation, graphic optimized and so on.
Intelligent capturing, which makes drawing more convenient and accurate.
Unique properties option design, which helps user to design the cutting graphic more easily.
Support various sort methods, auto sort can recognize the film inside or outside the graphic to make
sure the path planning optimized.
Powerful lead line function, support various ways to lead line, auto added suitable lead line based
on graphic nested relations. Support check/revise interfered lead line by one click.
2) Complete cutting process, debugging easily
Support all kinds of cutting process: Section drill, gradual drill, 3 stages drill, cutting with film, fix
height cutting, and predrill and so on.
Support laser’s power/frequency adjusted with speed, to decrease or avoid the problem of firing
corners when cutting carbon steel.
Support multilayer cutting or marking, and other sorts of processing ways.
Support micro-joint, gap, over-cutting, bridge, kerf-compensation and so on.
Powerful material database, which can save all sorts of material cutting process.
Support complex functions: Edge seeking, fly-cutting and so on.
Support breakdown position tracking/forward/backward and so on.
3) Rea-time alarm, stable and reliable.
Support running error measurement, it can check the error between running orbit and graphic error.
Real-time alarming the status of capacitive height controller, laser, gas and other equipment, make
sure the security during cutting.
More than 50 different kinds of alarms, to secure the equipment in whole aspect, avoid user’s wrong
operation.
1.2 UI and descriptions
Graphic 1-1 UI
To Next Page
Loading...