Copyright © WUHAN AU3TECH TRADING CO., LTD
SC1000 Fiber Laser Cutting CNC System User’s Manual Version： V1.00
Cutting with film once check this option. SC1000 will cut the graphic twice,
once to cut the film with a certain height.
Keep gas on when drilling.
Drilling in advance before cutting.
3 stages
drill/section/gradual
Drilling in 3 stages. (暂时没想到更合适的定义)
Descriptions.
Layer parameters will be revised very often during cutting/debugging. So user can adjust all the
parameters according to your needs to achieve the best cutting effects.
3.7 Status bar
Status bar mainly display the current running status, including the connecting status of motion
control card/FTC/ Laser, X/Y’s current location, current cutting speed and so on, so that user can check it
easily.
To Next Page
Loading...
