Au3Tech SC1000 - 3.6 Layer parameters option

Copyright © WUHAN AU3TECH TRADING CO., LTD
44
SC1000 Fiber Laser Cutting CNC System User’s Manual Version： V1.00
2017 年 3 月 27 日
The descriptions of each message/alarm：
Message
bar
Type
Descriptions
Message
Running status
message
This type of message mainly records all the key running
status, such as: the connecting status of motion control
card/laser/FTC and so on.
Cutting message
This type of message mainly records all the key cutting
information, such as: cutting time/cutting distance/drilling
number/cycle index and so on.
Other message
This type of message mainly records like measurement
results.
Alarm
System alarm
This mainly records system alarm such as limited
alarm/servo input alarm and so on.
And all the messages and alarms can be checked by “SYSTEM ANALYSIS” ->“Log”.
3.6 Layer parameters option
Layer parameters option includes cutting layer process property and one single layer property, user
can quickly set up the parameters accordingly.
SC1000 can auto-match layer property according to user’s selection. Layer parameters: click each
layer to set up the parameters.