Au3Tech SC1000 - Page 45

Copyright © WUHAN AU3TECH TRADING CO., LTD
45
SC1000 Fiber Laser Cutting CNC System User’s Manual Version： V1.00
2017 年 3 月 27 日
Descriptions
 The selected layer property can be revised any time and works immediately.
The descriptions of each parametes shows as below：
Layer
Name
Descriptions
Default value
Cut
parameters
Cut Speed (mm/s)
Speed when cutting
200.00
Laser on Delay (ms)
Delay time when laser on
0
Cut Power (%)
Laser power in proportion when cutting
100
Cut Frequency (HZ)
Laser frequency when cutting
5000
Peak Current (%)
Laser peak current in proportion when
cutting
100
Cut Height (mm)
The following height when cutting
1.00