10
3. Status LED
Once connected to your computer and
powered on, the white status LED on iD24 will
illuminate.
If at any time the status LED turns o during
normal operation please check all connections
and if further problems develop please
contact Audient support.
4. Double Checking Connectivity
To ensure iD24 has been detected by your
computer and correct clocking sources are
set-up, navigate to:
Macintosh HD > Applications >
System Preferences
Check that iD24 is set as your audio device.
It’s recommended to disable system sounds.
It’s also worth checking Audio MIDI Setup
(found in Mac HD > Applications > Utilities).
Window > Show Audio Window
Here you should see iD24 report with 10
inputs and 14 outputs. The clock source is
configured in the iD app. See page 24 for
more details.
5. Open the iD Mixer
Run the iD Software. It will appear as an icon
in the Menu bar of MacOS. Click on this and
select ‘Open Mixer Software’.
Mac Installation
To Next Page
Loading...
