32
• ø (Phase Flip)
Pressing this switch flips the phase of
one side of the stereo field. Used in
conjunction with the Mono button, this
can be a great way to remove centred
elements from a mix in order to hear the
hidden elements of a mix.
• Mono
The Mono button sums the stereo
outputs down to mono. This can be used
to quickly check the mono compatibility
of your mix to make sure it’ll sound great
almost anywhere!
• ALT
Alt allows you to quickly switch your
monitor path to a secondary set of
monitors to let you check how your mix
translates on various speakers.
You can select which outputs the ‘ALT’
monitor control flips to in the System
Panel.
• DIM
Reduces the output level by a preset
amount which can be great if you get a
call or need to quickly chat to someone
during a session.
• Cut
Cuts all signal currently being sent to the
Main Mix of the iD24.
Assigning F-Keys
Various functions of the iD mixer application
can be assigned to the Function Keys of the
iD24 to allow you to quickly control your
monitoring at the click of a button.
To assign a monitor control to an F-Key, simply
right click on the control and select the F-Key.
To Next Page
Loading...
