88
11
CHAPTER
3
CXiR Diversity
Receiver
The CX
iR
is a multi-frequency UHF diversity
receiver, designed with a range of modular adapters
to allow it to be mounted internally in the latest
camcorders from Sony, Philips, and Ikegami.
Alternatively, a universal adapter fitted with the six
pin Lemo socket is available allowing the CX
iR
to be
used externally with camcorders that do not provide
a built-in wireless microphone receiver slot. Also,
the CX
iR
can be used as a portable documentary or
ENG receiver. All settings can be read or changed
via infra-red control using the Switch
iR
.
○○○ ○○○○○○○○○○○○○○○○○○○○○
Controls, displays, and connections
Top panel
Antenna 2
RX2 (yellow)
Antenna 1 Infra-red port
(yellow) RX1
No
signal
(red)
Low TX
battery
(amber)
Antenna 1/Antenna 2
SMA sockets to which the antennae are connected.
Infra-red port
Receives commands from and transmits status
information back to the Switch
iR
infra-red controller.
RX1/RX2 indicators (yellow)
Indicates which of the unit’s two built-in receivers is
active at any time.
Low TX battery indicator (amber)
Indicates when the transmitter battery is low and needs
replacing.
No signal indicator (red)
Indicates that no carrier signal is being received from
the transmitter, such as when the transmitter is
switched off or set to an incorrect frequency.
CHAPTER
3
To Next Page
Loading...