88
16
CXiR Receiver
The maximum external DC supply must not exceed 18V.
Exceeding this voltage will result in damage to the
receiver.
Audio Limited recommend the use of their regulated
cables to prevent damage to the CX
iR
.
Mounting options
The CX
iR
can be supplied already fitted with the
appropriate adapter for a specific camcorder.
Alternatively it can be supplied with a Lemo adapter for
applications where the CX
iR
is to be used with a mixer,
or a camcorder without an integral wireless microphone
receiver slot. In this case the receiver can be mounted
onto the camera with an appropriate bracket available
from Audio Limited.
Adapters are available separately to allow you to modify
a CX
iR
for use with a different camcorder. To change the
adapter unscrew the four screws on the side of the unit
at the base with a slotted screwdriver. Slide out the
adapter and replace it with the appropriate replacement
adapter:
Do not remove the screws at the base of the unit.
To Next Page
Loading...