Audio Technica 3000 Series User Manual

49
Configuring settings related to remote control (REMOTE CTRL)
1
From the menu screen, turn the control dial, select “NETWORK” and then press the control dial.
2
Turn the control dial, select “REMOTE CTRL” and then press the control dial.
3
Select an item you wish to set and press the control dial.
Item
Description
Port
Set the IP port number.
Notification
Set to receive notifications from the transmitter during remote control.
LVL Notify
[1]
Set whether to include AF and RF levels in notifications from the
transmitter during remote
control.
Multicast Port
[1]
Set the port number for multicast.
Multicast IP
[1]
Set the address for multicast.
[1] This can be set only when “Notification” is set to “ON”.
4
Set each item.
5
Press the BACK button.
The Reboot confirmation screen appears.
6
Turn the control dial to select "Reboot" / "Later" and press the control dial.
When
"Reboot" is selected, the transmitter will reboot immediately to complete the setup.
When "Later" is selected, the setup is complete temporarily. Be sure to reboot later. If you do not reboot, the network
settings will not be completed.

Audio Technica 3000 Series Specifications

General

Brand	Audio Technica
Model	3000 Series
Category	Microphone system
Language	English