Hardware Installation Manual 10 Document #: LTRT-10453
Mediant 500L MSBR
2 Unpacking the Device
Follow the procedure below for unpacking the carton in which the device was shipped.
To unpack the device:
1. Open the carton and carefully remove packing materials.
2. Remove the chassis from the carton.
3. Check that there is no equipment damage.
4. Ensure that in addition to the chassis, the package contains the following items:
• Four anti-slide bumpers for desktop installation
• Two Wi-Fi antennas (depending on ordered model)
• Two cellular antennas (depending on ordered model)
• AC/DC power adapter
5. Check, retain and process any documents.
If there are any damaged or missing items, notify your AudioCodes sales representative.
To Next Page
Loading...
