Hardware Installation Manual 6 Document #: LTRT-10453
Mediant 500L MSBR
Caution Electrical Shock
Do not open or disassemble this device. The device carries high voltage and
contact with internal components may expose you to electrical shock and bodily
harm.
Warning: The device must be installed and serviced only by qualified service personnel.
Warning: Disconnect the device from the mains and Telephone Network Voltage (TNV)
before servicing.
Note: Prior to installing and operating the device, please read the Regulatory Information
at https://www.audiocodes.com/media/13531/mediant-500l-regulatory-information-
en_de.pdf.
Note: Open source software may have been added and/or amended. For further
information, visit AudioCodes website at https://www.audiocodes.com/services-
support/open-source or contact your AudioCodes sales representative.
Document Revision Record
LTRT Description
10443 A/VDSL LEDs updated.
10444 DSL connector pinouts updated
10445 AC power cable warning (Japanese); STATUS LED update.
10446 Wall mounting and 19-inch rack mounting.
10447 FE changed to GE.
10448 Typo re 19-inch rack mount shelf.
10449 Logo updated; PSTN Fallback/Analog Lifeline updated.
10450 Max. BRI ports increased; SFP module for WAN copper; LTE 4G Cellular WAN
10451 4G LTE; typos with AC and DC; AC/DC power adapter warnings
10452 No USB with LTE support.
10453 Package items updated (serial cable removed).
Documentation Feedback
AudioCodes continually strives to produce high quality documentation. If you have any
comments (suggestions or errors) regarding this document, please fill out the
To Next Page
Loading...
