Version 5.2/5.4 11 January 2009
Troubleshooting Guide 2. IP Connectivity
3. In the 'Command-Line' field, enter the following command:
ping [IP address of the remote destination]
For example, ping 10.33.2.34.
4. Wait several seconds and then enter the following command:
show ping
The following information is displayed:
ping 10.33.2.34
Ping process started for address 10.33.2.34. Process ID - 23.
Reply from 10.33.2.34: bytes=0 time=0ms
Reply from 10.33.2.34: bytes=0 time=0ms
Reply from 10.33.2.34: bytes=0 time=0ms
Reply from 10.33.2.34: bytes=0 time=0ms
Ping statistics for 10.33.2.34:
Packets: Sent = 4, Received = 4, Lost 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
To Next Page
Loading...
Need help?
General
