AUMA AUMATIC AC 01.2 Operation Instructions

225.3. Accessories for electrical connection
225.3.1 Controls mounted to wall bracket
235.3.2 Parking frame
235.3.3 Protection cover
245.3.4 Double sealed intermediate frame
245.3.5 Earth connection, external
256. Operation................................................................................................................................
256.1. Manual operation
256.1.1 Manual operation: engage
256.1.2 Manual operation: disengage
256.2. Motor operation
256.2.1 Local actuator operation
266.2.2 Actuator operation from remote
276.3. Menu navigation via push buttons (for settings and indications)
276.3.1 Menu layout and navigation
286.4. User level, password
296.4.1 Password entry
296.4.2 Password change
306.5. Language in the display
306.5.1 Change language
327. Indications..............................................................................................................................
327.1. Indications during commissioning
327.2. Indications in the display
337.2.1 Feedback indications from actuator and valve
367.2.2 Status indications according to AUMA classification
377.2.3 Status indications according to NAMUR recommendation
387.3. Mechanical position indicator/running indication
397.4. Indication lights
408. Signals.....................................................................................................................................
408.1. Status signals via output contacts (digital outputs)
408.1.1 Assignment of outputs
408.1.2 Encoding of outputs
408.2. Analogue signals
419. Commissioning (basic settings)...........................................................................................
419.1. Type of seating: set
429.2. Switch compartment: open
439.3. Torque switching: set
439.4. Limit switching: set
449.4.1 End position CLOSED (black section): set
449.4.2 End position OPEN (white section): set
459.5. Intermediate positions: set
459.5.1 Running direction CLOSE (black section): set
459.5.2 Running direction OPEN (white section): set
469.6. Test run
469.6.1 Direction of rotation: check
479.6.2 Limit switching: check
479.6.3 Reference operation position feedback: perform
489.7. Potentiometer setting
489.8. Electronic position transmitter RWG: set
3
SA 07.2 – SA 16.2/SAR 07.2 – SAR 16.2 Control unit: electromechanic
AC 01.2 Intrusive Table of contents

AUMA AUMATIC AC 01.2 Specifications

General

Brand	AUMA
Model	AUMATIC AC 01.2
Category	Controller
Language	English