AUMA AUMATIC AC 01.2 Operation Instructions

499.9. Mechanical position indicator: set
509.10. Switch compartment: close
5110. Corrective action....................................................................................................................
5110.1. Faults during commissioning
5110.2. Fault indications and warning indications
5510.3. Fuses
5510.3.1 Fuses within the actuator controls
5610.3.2 Motor protection (thermal monitoring)
5811. Servicing and maintenance...................................................................................................
5811.1. Preventive measures for servicing and safe operation
5811.2. Maintenance
5911.3. Disposal and recycling
6012. Technical data.........................................................................................................................
6012.1. Features and functions of actuator
6212.2. Features and functions of actuator controls
6512.3. Service conditions
6512.4. Accessories
6512.5. Further information
6613. Spare parts.............................................................................................................................
6613.1. Multi-turn actuators SA 07.2 – SA 16.2/SAR 07.2 – SAR 16.2
6813.2. Actuator controls AUMATIC AC 01.2
7014. Certificates..............................................................................................................................
7014.1. Declaration of Incorporation and EC Declaration of Conformity
7115. Index........................................................................................................................................
73Addresses...............................................................................................................................
4
SA 07.2 – SA 16.2/SAR 07.2 – SAR 16.2 Control unit: electromechanic
Table of contents AC 01.2 Intrusive

AUMA AUMATIC AC 01.2 Specifications

General

Brand	AUMA
Model	AUMATIC AC 01.2
Category	Controller
Language	English