AUMA SAEx 16.2 Operation Manual

In case of a fault: Hazardous voltage while protective earth conductor is NOT
connected!
Risk of electric shock.
→
Connect all protective earth conductors.
→
Connect PE connection to external protective earth conductor of connecting cables.
→
Start running the device only after having connected the protective earth conductor.
6.
Firmly tighten protective earth to PE connection (symbol: ).
Figure 15: PE connection
[1] U-bracket for PE connection
Information Some actuators are equipped with an additional motor heater.The motor heater minimizes
condensation in the motor.
22
SAEx 07.2 – SAEx 16.2 / SAREx 07.2 – SAREx 16.2
Electrical connection

AUMA SAEx 16.2 Specifications

General

Brand	AUMA
Model	SAEx 16.2
Category	Controller
Language	English