AUMA SAEx 16.2 Operation Manual

235.3.1. Parking frame
245.3.2. Protection cover
245.3.3. External PE connection
256. Operation................................................................................................................................
256.1. Manual operation
256.1.1. Manual operation: engage
256.1.2. Manual operation: disengage
256.2. Motor operation
267. Indications..............................................................................................................................
267.1. Mechanical position indicator/running indication on indicator mark on cover
278. Signals.....................................................................................................................................
278.1. Feedback signals from actuator
289. Commissioning......................................................................................................................
289.1. Switch compartment: open
289.2. Torque switch setting
299.3. Limit switch setting
309.3.1. End position CLOSED (black section): set
309.3.2. End position OPEN (white section): set
319.4. Intermediate positions: set
319.4.1. Running direction CLOSE (black section): set
329.4.2. Running direction OPEN (white section): set
329.5. Test run
329.5.1. Direction of rotation: check
349.5.2. Limit switch checking
349.6. EWG 01.1 electronic position transmitter
359.6.1. Measuring range: set
369.6.2. Current values: adjust
369.6.3. LED end position signaling: switch on/off
369.7. Potentiometer
379.7.1. Potentiometer setting
379.8. RWG electronic position transmitter
389.8.1. Measuring range: set
389.9. Mechanical position indicator: set
399.10. Switch compartment: close
4110. Corrective action....................................................................................................................
4110.1. Faults during commissioning
4110.2. Motor protection (thermal monitoring)
4311. Servicing and maintenance...................................................................................................
4311.1. Preventive measures for servicing and safe operation
4411.2. Disconnection from the mains
4511.3. Maintenance
4511.4. Disposal and recycling
4612. Technical data.........................................................................................................................
4612.1. Technical data Multi-turn actuators
3
SAEx 07.2 – SAEx 16.2 / SAREx 07.2 – SAREx 16.2
Table of contents

AUMA SAEx 16.2 Specifications

General

Brand	AUMA
Model	SAEx 16.2
Category	Controller
Language	English