AUMA SAR 07.2 Operating Instructions

Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Store operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Target group:
This document contains information for assembly, commissioning and maintenance staff.
Reference documents:
●
Manual (device integration) of actuator controls AC 01.2 EtherNet/IP
Reference documents can be downloaded from the Internet (www.auma.com) or ordered directly from AUMA
(refer to <Addresses>).
Table of contents Page
51. Safety instructions.................................................................................................................
51.1. Prerequisites for the safe handling of the product
51.2. Range of application
61.3. Applications in Ex zone 22 (option)
71.4. Warnings and notes
71.5. References and symbols
82. Identification...........................................................................................................................
82.1. Name plate
112.2. Short description
123. Transport and storage...........................................................................................................
123.1. Transport
143.2. Storage
164. Assembly................................................................................................................................
164.1. Mounting position
164.2. Valve attachments
164.2.1. Design of output drive type A
164.2.2. Design of output drive types B and E
174.3. Handwheel fitting
184.4. Multi-turn actuator: mount to valve/gearbox
184.4.1. Stem nut for output drive type A: finish machining
194.4.2. Multi-turn actuator with output drive type A: mount
204.4.3. Multi-turn actuator with output drive type B: mount
214.5. Accessories for assembly
214.5.1. Stem protection tube for rising valve stem
224.6. Mounting positions of local controls
224.6.1. Mounting positions: modify
235. Electrical connection.............................................................................................................
235.1. Basic information
255.2. Overview of AUMA electrical connections
265.3. SJ electrical connection (AUMA plug/socket connector)
275.3.1. Terminal compartment (for mains connection): open
285.3.2. Cable connection
2
SA 07.2 – SA 16.2 / SAR 07.2 – SAR 16.2 Control unit: electronic (MWG)
Table of contents AC 01.2 Non-Intrusive EtherNet/IP

AUMA SAR 07.2 Specifications

General

Brand	AUMA
Model	SAR 07.2
Category	Controller
Language	English